点群10mm十次对称二维准晶中的两类接触问题

采用复变函数法探讨了在一个刚性压头作用下十次对称二维准晶材料的两类接触问题,即具有有限摩擦的接触问题以及粘结接触问题.特别地对于平底压头,获得了表征声子场和相位子场的全纯函数的显式表达式,以及在压头上的接触应力分布.结果显示,对于具有有限摩擦的接触问题,接触应力在接触区边缘具有实指数奇异性-1／2±β,其中β由准晶体的材料常数及静摩擦系数确定;而对于粘结接触问题,接触应力在接触区边缘具有振荡型奇异性-1／2±iε,其中ε由准晶体的材料常数确定.     

Invariant Integrals in the Problem of a Crack on the Interface between Two Media

The equilibrium problem for an elastic body containing a crack on the interface between two media is considered. It is proved that there exist invariant (independent of the integration surface) integrals in this problem. The existence of invariant integrals is also established in the problem of a contact between an elastic body and a rigid stamp. Nonlinear boundary conditions of mutual non-penetration are prescribed on the contact boundaries. The physical meaning of invariant integrals is established.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 123–137, September–October, 2005.     

Contact interaction of a rigid heat-conducting punch with an elastic layer involving nonstationary frictional heating

A mathematical formulation is given and a solution is found to the quasistatic contact problem of thermoelasticity for a rigid heat-conducting punch moving over an elastic layer with fixed base. The interaction is accompanied by heating due to frictional forces obeying Amonton’s law. The problem is reduced to a system of integral equations with time-varying limits of integration. The structure of these equations depends on the type of thermal and physical conditions on the contact surface. An algorithm is proposed for the numerical solution of this kind of equations. The variation in the contact pressure and contact area with time is studied __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 12, pp. 35–46, December 2005.     

不同材料参数和内压的轮胎对单腹板轮毂变形的影响

将轮胎材料简化为各向同性超弹性材料特性，考虑轮胎与轮毂和地面之间的三维接触以及轮胎中钢丝圈的影响，建立飞机单腹板机轮整体结构有限元模型。主要分析不同轮胎材料参数和内压下，单腹板轮毂轮缘处的径向变形，结果表明；轮毂剖面上测点的应变值与实验结果基本一致。轮胎下沉量与轮毂测点的径向变形和轮毂所受的载荷基本呈线性关系；凸出一侧的轮缘变形最大；轮胎下沉量较大时。轮胎材料参数对轮毂的径向变形影响明显；轮毂测点径向变形在1-2.5mm时，相同的径向变形，轮毂受到的总载荷受轮胎材料参数变化而变化，而在变形较大或较小时，影响不明显。对于同一种轮胎材料，不同的内压，轮毂的变形减轻比较大，气压越高，对于相同的轮胎下沉量，轮毂受到总体荷载也越高。     

Dynamic operation modes of AFM: Non-linear behavior and theoretical analysis of the stability of the AFM oscillator

The first part of this paper gives a theoretical study of the mechanics of contact of an AFM tip on viscous materials. Analytical expressions are derived showing the non-linear behaviors specifically related to the use of dynamic operation modes of AFM on viscous materials. A detailed analysis of the dissipated energy as a function of the tip indentation is presented. The second part is dedicated to a theoretical analysis investigating the domain of stability of the oscillator and the influence of the machine. The theoretical approach includes the electronic feedback loop used with the frequency modulation mode. Because the interaction between the tip and the sample produces a dynamical non-linear behavior, an unstable branch occurs that can change the stability of the oscillator. In particular, a sudden jump of the oscillating tip can be produced. In spite of the complexity of the problem, the analytical approach ends with two simple equations. The two equations provide an unambiguous way of discriminating between the contributions from the machine and the tip sample interaction.     

ANALYSIS OF AN INCOMPRESSIBLE RUBBER WEDGE CONTACTING WITH A RIGID NOTCH

I. INTRODUCTION It is well known that rubber materials are much more important in modern society. It is, therefore,not surprising that a sizable number of investigations have been concerned with the rubber materials.Considerable attention has been paid …     

New models for a class of adhesive grippers. The hemivariational inequality approach

Summary A hemivariational inequality model for adhesive grasping problems is proposed and studied in this paper. The unilateral frictionless and frictional contact effects between the fingertips and the grasping object that lead to linear complementarity problems with singular matrices for the study of static equilibrium of the gripper-object system are generalized here to cover adhesive multifingered grippers. Adhesive effects are modelled by appropriately defined, generally nonconvex, yield sets in the space of contact stresses, friction stresses, gaps or frictional slips and their combinations. The hemivariational inequality problem that arises may involve copositive plus, symmetric matrices and nonempty closed sets for the frictionless gripper problem and copositive plus, nonsymmetric matrices with starshaped sets for the frictional case. Solvability conditions that guarantee the existence of a solution to the gripper problem are given. They specify the conditions which are required to hold between external forces, fingertip mechanical behavior and finger placement in order to solve the gripper problem.     

Effects of oxidation and surface roughness on contact angle

Contact angle is known to be a parameter that effects boiling. This study was undertaken to measure contact angle of high and low surface tension fluids on copper and aluminum surfaces.Data were taken for polished, oxidized, and rough surfaces. A simple, yet fairly accurate method of measuring the static equilibrium contact angle of a solid/liquid interface is presented. The principles of a line light source and tilting plate were modified and then combined in the design of this apparatus. The angles obtained and their variation with the solid surface properties were in good agreement with previously published data. The contact angle of distilled water o of the organic fluids and refrigerants tested were in the range of 2–5°. Roughness and oxidation reduce the contact angle. If the depth of the roughness is less than 0.5 μm contact angle. The apparatus is fairly simple in construction, is inexpensive, and has good reproductibity. The measured angles were then compared to those measured with the sessile drop method.     

Observation of room temperature negative differential resistance in solution synthesized ZnO nanorod

We report the observation of negative differential resistance (NDR) in solution synthesized ZnO nanorod. The ZnO nanorod was fabricated as a two terminal planar device using lithographically patterned Au electrodes. The measured current–voltage response of the device has shown a negative differential resistance behavior. The peak-to-valley current ratio of the NDR is found to be greater than 4. The mechanism of this observed NDR effect has been explained based on charge trapping and de-trapping at the nanoscale contacts. It is the first observation of negative differential resistance effect in solution synthesized ZnO nanorod.     

微粗糙结构表面液滴浸润特性的多体耗散粒子动力学研究

超疏水表面因其优异的自洁作用一直是表面科学领域关注的重点.本文使用多体耗散粒子动力学(many-body dissipative particle dynamics, MDPD)方法模拟研究了不同粗糙结构下液滴的浸润特性, 并与Cassie-Baxter理论进行了对比. 研究使用了一种具有长吸短斥作用的流固作用函数来获得不同的液滴浸润性, 并利用一种简洁的数值方法来测量接触角. 模拟结果表明本研究方法能够稳定地捕捉到液滴在粗糙表面的静态和动态特性. 模拟了粗糙结构对三相接触线运动的黏滞作用, 与物理实验结果相符合, 表明Cassie-Baxter理论在实际应用中尚存在一定局限性. 研究分析了在动态铺展过程中的能量转化关系, 并指出在低值表面容易引起液滴反弹.